Self-Service Terminals

Simple Self-Service by the Driver

Solution

Logistic Terminals for automated Yard Management

Self-service terminals provide for simple self-service by the driver

Our versatile self-service terminals complete our yard automation portfolio. They allow for automation of operational procedures in yard management and considerably reduce the workload of your personnel. The logistic terminals of rugged design are intended for daily use on industrial yards.

Efficient yard management - from registration to factory exit:

Registration
Plant access
Weighing
Loading
Unloading
Document issue
Factory exit

In addition to these main functions, safety checks, quality controls, load securing and much more can also be mapped. Our yard management terminals make your processes on site efficient – to protect your resources, minimise waiting times, and simplify administration and supervision. You will save time and you will grab a competitive advantage of crucial importance.

Our customers trust in us

Kunde HeidelbergCement Yard Management logis

Kunde Adelholzener Yard Management logis

Our portfolio of logistic terminals in detail

Logistic Terminal
LT Cube

The logistic terminal "LT Cube" is a self-service terminal for your yard management. It is suitable for an industrial use – indoor and outdoor.

registration in several languages
display / inquiry of PPE and in-house regulations
handing out of pagers (in case of the control of incoming lorries)
collection device for pagers (in case of the control of incoming lorries)
output of documents
control of loading or unloading transactions
calibratable weighing
scanning of documents

Yard Management self-service terminal LT Cube

- self-service terminal made of stainless steel for indoor and outdoor use
- highly available thanks to robust industrial components
- freely configurable thanks to a modular and scalable layout
- sun-protected installation of components
- self-service function
- control from the driver's cab possible (height adjustment)
- different identification systems can be integrated (also systems provided by the customer)
- output of documents (receipt / label / delivery note)
- communicator
- several interfaces (Ethernet, Profinet, Profibus, etc.)
- Body and door in stainless steel, lockable, powder-coated in RAL 7035
- Stainless steel front frame, powder-coated in RAL 3020
- Modular operating fronts in stainless steel, powder-coated in RAL 7035
- Concrete terminal base with cable duct
- Air circulation unit
- Industrial PC
- Touchscreen, sun-protected installation
- Touch pen for operation and signature, secured by stainless steel cable
- Analogue telephone station with additional amplifier for increased sound pressure
- Barcode scanner (barcode and QR code)
- Laser printer with document output tray incl. blocking, paper sensor and lighting unit
- Operating and maintenance instructions
- Project-specific circuit diagram according to OAS standard
- Daylight-compatible, sensor-controlled touchscreen
- IO coupling level
- Pager magazine with output function (scalable)
- Pager return unit
- Transponder identification system
- Front camera with 4K resolution
- Receipt/label printer with receipt output tray
- Document scanner
- VoIP telephone station with one-button operation
- Control panel with illuminated pushbuttons
- Control panel for loading controls
- Roller shutter for extended protection against vandalism, manual or time-controlled
- Traffic light, mounted on the side of the terminal
- Zeroing device, mounted on the side of the terminal
- Terminal heating, thermostat-controlled
- Multiple operating heights with up to three touchscreens
- Terminal cooling with fresh air intake from the terminal base
- Insulation of the rear and side walls of the terminal
- Raised stainless steel base

Logistic Terminal
LT Compact

The logistic terminal of the type SBD-T is a self-service terminal for loading control and weighing. It is suitable for an industrial use – indoor and outdoor.

registration in several languages
display / inquiry of PPE and in-house regulations
control of loading and unloading transactions
calibratable weighing
output of documents
collection device for pagers (in case of the control of incoming lorries)

yard management self-service terminal LT Compact

- self-service terminal made of stainless steel for indoor and outdoor use
- highly available thanks to robust industrial components
- freely configurable thanks to a modular and scalable layout
- sun-protected installation of components
- self-service function
- different identification systems can be integrated (also systems provided by the customer)
- calibratable weight display
- output of documents (receipt / label)
- communicator
- several interfaces (Ethernet, Profinet, Profibus, etc.)
- Basic control cabinet V2A, lockable
- Industrial system computer
- Daylight-compatible touchscreen, installed in the light well with low glare
- PE input pin
- Information window
- I/O interface
- Powder-coated stainless steel housing
- Project-specific circuit diagram according to OAS standard
- Operating and maintenance instructions
- RFID identification system with external antenna (read/write function)
- VoIP telephone station
- Scanner (bar and QR code)
- Receipt printer with receipt output tray
- Surveillance camera
- Weighing indicator wcon-I
- Calibratable weight indicator wcon-S
- Pager return function (with additional collection container for 120 pagers)
- Heating, thermostat-controlled

Logistic Terminal
SBC

The logistic terminal of the type SBC is a self-service terminal for control and the collection of pagers. It is suitable for an industrial use – indoor and outdoor.

loading permission
unloading permission
barrier control
gate control

yard management self-service terminal SBC

- self-service terminal made of stainless steel for indoor and outdoor use
- highly available thanks to robust industrial components
- freely configurable thanks to a modular and scalable layout
- self-service function
- different identification systems can be integrated (also systems provided by the customer)
- communicator
- several interfaces for the processing of weighing data (Ethernet, Profinet, Profibus, etc.)
- powder coated stainless steel housing
- omnidirectional barcode scanner
- web controller featuring I/O level
- 3 luminous pushbuttons
- transponder identification system (writing and reading)
- communicator

Variants of our self-service terminals

Our logistic terminals are available in several variants with different equipment. We offer the options below:

freely configurable thanks to a modular and scalable layout
highly available thanks to robust industrial components
indoor and outdoor use
operation from vehicle at different operating heights possible
protected installation of components
operator terminal featuring powder-coated stainless steel front panels of a high IP rating
touch screen for use in daylight
signature on the touch screen
different identification systems can be integrated (also systems provided by the customer)
output of documents (receipt/label printer or laser printer (black and white or colour)
communicator
omnidirectional barcode/QR scanner, sun-protected
calibratable weight display
memory of weight values (calibratable)
forced air circulation with thermostat-controlled heating system

Functions and fields of application of our self-service terminals in detail

Targeted planning of resources and minimising of waiting times – the self-service terminals by OAS automate the operational procedures of your company in yard management and in the control of incoming lorries, which considerably increases efficiency:

External service providers, such as the drivers of lorries, can use the self-service terminal to call orders independently and to carry out weighing and loading on their own. The driver signs the shipping documents directly on the touch screen of the self-service terminal to print them immediately. Data processing on the spot absolutely reduces the administrative and processing expenditure because you do not need to manually enter the order and shipping documents again into the system. Moreover, all data from the virtual memories in the terminals are available as electronic data immediately and plant-wide. This leads to easy management, maximum transparency, and monitoring.
The user interface of the self-service terminal is available in several languages: the driver simply selects the desired language for the dialogue by touching a flag on the welcome screen. The multilingual dialogues are simple and comprehensible. Where possible, icons and graphics are used instead of dialogues.
They are of a rugged design and, therefore, suitable for daily use on industrial yards. The touch screens for use in daylight also allow an outdoor installation within the scope of the yard management. Since the terminals are adjustable in height, the drivers may control all functions from the driver's cab, as well. Upon customer request, special functions, such as document scanning, pager handling, or biometric identification (e.g. by finger print) can be integrated into the system.
Development and construction of the self-service terminals are effected on the premises of OAS AG and are based on our treasure trove of experience gained in this business segment over 25 years.

Your inquiry

We are at your disposal and looking forward to your inquiry.

Your contact to OAS AG

Are you interested in more information about OAS AG? Do you want to ask for a quotation? Do you have questions about one of our business segments? Or do you need support on your hardware, software, or infrastructure? Please do not hesitate to contact us. We will be pleased to help you!

add contact us now

Contact